|Two men team attendance fee||1||90.00||18.00||108.00|
|Rate per hour||?||60.00||12.00||72.00|
|Condenser cleaning agent||?||A||A||A|
|Evaporator cleaner agent||?||B||B||B|
|Heavy duty cleaner||?||C||C||C|
Your savings against any other companies:
|+ Any other fees for the expenditure we have made in order to provide you with the service, like parking fees or spare part postage fees.|
To book service please call 02037011874 or use our 24/7 online booking service below.
This is what you will get: Two engineers on a 3.5T fully equipped van will attend your site and will accurately carry out maintenance tasks on your equipment. Without quotation our engineers are allowed to carry out “non quoted works” in total sum of up to 250 GBP exclusive of spare parts and consumables. After the call-out fee this will leave engineers with the 2.5 hours of labor time. We estimate that engineers will be able to conduct maintenance at the rate of two-three units per hour.
In case if the cost of full site maintenance will exceed the maximum allowed cost for “non quoted works” (this may be the case with hotels, hospitals, schools and other large sites) the engineers will estimate the time that will be required to complete the job and will forward his estimate to the office. Our office will supply you with the quotation. Upon acceptance of the quotation the works will be undertaken. Regardless if you will accept our quotation or not, the engineers will start the maintenance job within the budget of the “non quoted works” unless instructed differently by you.
Successful maintenance will be followed up by VAT invoice. Depending on the type of equipment you are using, maintenance service includes:
|Clean condenser||Clean condenser air filter||Check condenser fan rotation|
|Check filter for damage||Check condensing temperature||Check condenser fins|
|Record ambient temperature||Check lagging||Check door furniture|
|Check door gasket||Check panel condition||Check lights|
|Check thermostat||Check controller settings||Check internal release button|
|Check belts and pullies||Check guards||Check klixon|
|Clean evaporator||Check evaporator for damage||Clean evaporator filter|
|Check evaporator filter for damage||Check evaporator air flow||Check evaporator fan rotation|
|Test heater elements||Check drain line||Check if all panels are present|
|Check if all panels are secure||Check drain pump||Check HP switch setup|
|Check LP switch setup||Check HP switch operation||Check LP switch operation|
|Check superheat||Check subcooling||Visually check wiring|